Lian Li Lancool II Mesh C performance Midi-Tower Case - Black

With its modular design and mesh panelling, the Lian Li Lancool II Mesh C Performance is a highly flexible case with advanced cooling capabilities. Featuring three pre-mounted PWM fans, this chassis has incredible airflow that can be adjusted using the slider fan control button on the top panel. Inside, there is a carefully curated layout that can accommodate up to an E-ATX motherboard, 384mm long GPU, and has 176mm clearance for CPU coolers. Every chamber is easy to access, thanks to the hinged tempered glass and mesh PSU panels. The Lancool II Mesh C Performance can support all your high-end hardware, all with a premium finish.

Lian Li Lancool II Mesh C Mid-Tower Performance Black at a Glance:

• Steel mid-tower chassis with high density mesh panelling and 3 x PWM fans
• Modular design with dedicated cable management chambers
• Dual hinged tempered glass panels for easy access and the perfect showcase
• Supports up to an E-ATX motherboard and a 384mm long GPU
• Accommodates up to nine SSDs
• Extensive fan and radiator support with a multi-way radiator/fan bracket

Advanced Cooling

The Lian Li Lancool II Mesh C Performance Case has a premium design, carefully curated to facilitate advanced cooling. Many panels of this chassis feature a high-density mesh in a honeycomb pattern, to enhance airflow throughout the case. The natural airflow is boosted by the pre-mounted PWM fans.

Upon the front panel, there are two 140mm fans, with speeds ranging between 600 and 1200RPM, whilst there is a singular 120mm fan on the rear panel, with speeds between 600 and 1500RPM. The speed of these fans can be set utilising the fan control slider on the I/O panel, with four settings to choose from. These are Low Speed (45%), Medium Speed (75%), High Speed (100%), and PWM which varies the speed automatically according to work load. These controls connect to an included hub that can support up to six PWM fans with either 3- or 4-pin headers.

In addition to this, there is ample and flexible support for fans and radiators across the Lian Li Lancool II Mesh C. As an alternative to the two 140mm fans, the front panel can support three 120mm fans instead whilst the top panel can hold either two 120mm or 140mm fans. Finally, there is accommodation for two 120mm fans on top of the PSU chamber, situated on the mesh panel separating these areas.

When it comes to radiators, the top has capacity for a 240mm radiator when aligned to the left. Granting you amazing flexibility, there is a multi-way radiator/fan bracket that can be situated either closer to the motherboard or front panel. Depending on your hardware and how you want to cool your gaming PC will determine whether it’s in the 55mm or 110mm position.

Whether you rely on air cooling or prefer water-cooled systems, the Lian Li Lancool II Mesh C Performance can accommodate. With 176mm clearance for a CPU cooler, this is a particularly great chassis for AiO cooling loops.

Innovative Design

The interior design of the Lian Li Lancool II Mesh C Performance extends to the hardware installation. In its standard arrangement, this case can support ATX, Micro-ATX, and Mini-ITX motherboards. However, the back panel can be flipped, extending the mounting range and accommodating an E-ATX motherboard, up to 280mm wide. Plus, there are seven expansion slots to host graphics cards up to 384mm in length.

Thanks to the hinged panels, every corner of the Lian Li Lancool II Mesh C Performance Case is easy to access. Both tempered glass side panels open, and are held in place with a magnetic clip. The mesh panels on the PSU shroud also open out, allowing for easy installation of both the power supply and drive cage.

Modular Shroud

Furthering the flexibility of this case, the PSU chamber is modular with space up a power supply up to 210mm long. The drive cage can be positioned either to the left or right, depending on whether you want to install a reservoir or allow for more cable space. This drive cage can host up to three drives, either 2.5” SSDs or 3.5” HDDs. With support for nine SSDs in total, there are six more mounts located across the Lian Li Lancool II Mesh C Performance.

Found in pairs, these mounts are on the tray behind the motherboard, the bottom right flip shroud, and on the top mesh panel of the PSU chamber. SSDs can be mounted in this final location instead of the 120mm fans, depending on your need for storage or cooling. Even with the drives, the mesh is not fully covered, making for excellent ventilation.

Additional Features

The Lian Li Lancool II Mesh C Performance Mid-Tower Case has a fully equipped I/O panel. An improvement on the original Lancool II Mesh, this model features the USB 3.1 Type-C port

as standard. Additionally, there are two USB 3.0 ports and one TRRS audio jack. These are located to the right of the power button whilst the fan control slider is to the left.

With tempered glass affording an uninterrupted view to both sides of your gaming PC, the right-hand side features a number of panels. Perfect for concealing cables, these make managing loose ends and wire much easier. Additionally, this is where the integrated hub is situated. Available in black, the Lian Li Lancool Mesh II C Performance will keep your gaming PC looking sleek and tidy.

Lian Li Lancool II Mesh C Mid-Tower Performance Black Specifications:

Brand	Lian Li
Model	Lancool II Mesh C Performance Mid-Tower PC Case
Colour	Black
Materials	Steel 4.0mm tempered glass
Motherboard Support	E-ATX (up to 280mm wide) ATX Micro-ATX Mini-ITX
Expansion Slots	7
Graphics Card Support	GPU up to 384mm long
PSU Support	Up to 210mm long
Integrated Fans	Front 2 x 140mm PWM fans 600 – 1200RPM Back 1 x 120mm PWM fan 600 - 1500RPM
Fan Support	Front: 2 x 140mm or 3 x 120mm Top: 2 x 140mm or 2 x 120mm Top of PSU chamber: 2 x 120mm
Radiator Support	Multi-way fan/radiator bracket installed on front panel Front: 1 x 360 / 280 / 240mm Top: 1 x 240mm (aligned to the left)
CPU Cooler	176mm clearance
Drives	Drive Cage: 3 x 3.5” HDDs or 3 x 2.5” SSDs Behind Motherboard Tray: 2 x 2.5” SDDs Behind the Right Flip Panel: 2 x 2.5” SSDs Above PSU Chamber: 2 x 2.5” SSDs
I/O Panel	1 x Fan speed slide button 1 x TRSS Audio 2 x USB 3.0 1 x USB 3.1 Type C
Dust Filters	1 x Top magnetic filter 1 x Bottom tray
Dimensions	478mm x 229mm x 494mm D x W x H

UK Delivery

Order by 4pm (Monday to Friday) or 3pm (Saturday) for Next Day Delivery*
*Exclusions and product restrictions apply
Full Delivery Information

International Delivery

Delivery to over 40 countries
Full Delivery Information

Returns

14 Day return and refund period
Full Returns Information