- Pressure tester, air pump & accessories- Pressure tester measures between 0 - 2 bar- A G1/4 inch internal thread for connection to the water cooling system- Including a practical connection hose for easy checkingWater-cooled systems are the fine art of gaming enthusiasts. They are particularly quiet, stay cool even under full load and look good. Elaborate water cooling is particularly useful for particularly high-performance systems. You can cleverly avoid the risk of liquid damage when building your new custom loop with the Corsair Tool Kit .You get a pressure tester with a G 1/4 inch thread connection including the appropriate air pump. With this practical set you can check your water cooling circuit for leaks and thus easily avoid liquid damage to your best piece.The way it worksThe pressure tester is connected to your newly built cooling circuit via the existing G1/4 inch internal thread using the practical 20 cm connection hose and pressurized with the enclosed air pump. Then leave your system for 15-30 minutes. If a pressure drop has set in after this period, your water cooling system is leaking.If that's the case, check for the usual suspects like: Loose fittings. You have to repeat the process until there is no more pressure drop - only then are your components safe from imminent liquid damage.Technical details:- Material: aluminum- Measuring range: 0 - 2 bar- Connection thread: 1x G1/4 inchContents:- Pressure tester- Air pump- 20 cm long connection hose
